常见问题 ThinkPad常见报错信息说明 (Error messages)
2009-06-23知识编号:021225
催更新
Error messages
Symptom or error | FRU or action in sequence | |
Device address conflict. | 1 | Load “Setup Defaults” in IBM BIOS Setup Utility. |
2 | Backup battery. | |
3 | System board. | |
Allocation error for device. | 1 | Load “Setup Defaults” in IBM BIOS Setup Utility. |
2 | Backup battery. | |
3 | System board. | |
Failing bits: nnnn. | 1 | DIMM. |
2 | System board. | |
Invalid system configuration | 1 | DIMM. |
data. | 2 | System board. |
I/O device IRQ conflict. | 1 | Load “Setup Defaults” in IBM BIOS Setup Utility. |
2 | Backup battery. | |
3 | System board. | |
Operating system not found. | 1 | Check that the operating system has no failure and is installed correctly. |
2 | Enter IBM BIOS Setup Utility and see whether the hard-disk drive and the diskette drive are properly identified. | |
3 | Reseat the hard-disk drive. | |
4 | Reinstall the operating system. | |
5 | Diskette drive. | |
6 | Hard-disk drive. | |
7 | System board. | |
Hibernation error. | 1 | Restore the system configuration to what it was before the computer entered hibernation mode. |
2 | If memory size has been changed re-create the hibernation file. | |
Fan error. | Fan. | |
Thermal sensing error. | System board. | |
Authentication of system services failed. Press <Esc> to resume. | The IBM Predesktop Area in the HDD is broken. To use the IBM Predesktop Area get a recovery CD and recover the IBM Predesktop area using it. |
0
知识有用,就点一下~