BIOS更新说明 BIOS Update (Diskette) - ThinkPad A22m (Sxx models only)
2009-04-27知识编号:021584
IBM ThinkPad A 22m September 8 2003
System Program Service Diskette
Diskette Version : 1.05
BIOS Version : 13ET20WW
======================================================================
Notice:
-------
This program is language independent and can be used with any language
system.
What This Diskette Does
-----------------------
This System Program Service Diskette updates the system BIOS program
stored in the ThinkPad system to fix problems add new functions or
expand functions as noted below.
This release supports the following systems:
- ThinkPad A 22m Model Sxx
To determine if you have to update the system program or not refer to
the "Summary of Changes" section.
To update the system program refer to the "Installation instructions"
section.
Released Versions
-----------------
Version 1.00 (13ET14WW) Initial Release
Version 1.01 (13ET16WW) A fix for some problems
Version 1.02 (13ET17WW) Windows XP support
Version 1.03 (13ET18WW) Function update
Version 1.04 (13ET19WW) A fix for some problems
Version 1.05 (13ET20WW) A fix for some problems
Summary of Changes
------------------
Key: <n.nn> Diskette Version (for example 1.00 means Version 1.00)
(New) New Function or Enhancement
(Fix) Correction to existing function
<1.00 - 13ET14WW>
- (New) Support for ThinkPad A 22m Model Sxx.
<1.01 - 13ET16WW>
- (New) Add an option not to display "Press F1 for IBM BIOS Setup
Utility" message during POST.
- (Fix) It takes an extra 3 seconds during POST when 3.3V 16-bit PC
card is inserted.
- (Fix) 84-key is selected on cold boot under Windows NT4.0.
- (Fix) 0175 POST error occur.
- (Fix) If ECP mode is selected parallel port does not work after
resume from standby state on Windows Me and Windows 2000.
<1.02 - 13ET17WW>
- (New) Windows XP support
- (New) Improved resume speed on Windows Me and Windows 2000.
- (Fix) If Alert On LAN 2 is enabled sometimes file transfer through
network fails.
- (Fix) No display came upon LCD when a lid opened after undocked
from a ThinkPad Dock or a Port replicator with an external
monitor.(Windows 2000)
<1.03 - 13ET18W>
- (New) Improved CPU thermal control.
<1.04 - 13ET19WW>
- (New) Update POST 175 error check routine.
- (Fix) POST hang may occur if CMOS value is incorrect.
- (Fix) Dock/undock operation on Windows 98 causes a system freeze if
the DVD/CD-RW combo device is installed the in docking
station.
- (Fix) If the hibernation file structure is special hibernation
wakeup may cause a system hang.
- (Fix) A Password is required twice if the user presses the F1 key
when the password prompt appears.
- (Fix) The ThinkPad system does not wait long enough for the command
that stops the HDD spindle motor during a system power off.
- (Fix) Hibernation wakeup causes a system hang if the supervisor
password is installed and BIOS update diskette is inserted.
- (Fix) Password prompt will come up at reboot after suspend/resume
on an ACPI operating system.
- (Fix) Operating system installation using Remote Deployment Manager
(RDM = LCCM) causes a system hang.
- (Fix) If supervisor password is enabled disabling Legacy Floppy
Devices in the BIOS setup startup menu does not work
properly.
- (Fix) SpeedStep function does not work correctly on Windows98.
- (Fix) File transfer through network fails when Alert On LAN is
enabled.
<1.05 - 13ET20WW>
- (New) Added a BIOS option to disable built-in network card ROM
using upper 640KByte location. (Some network card features
will be disabled)
- (Fix) If Lid close action beep is enabled LCD close during OS boot
may cause continuous beep.
- (Fix) Improve security related process.
- (Fix) (Windows98) Error message appears on 2nd hibernation wakeup
with New USB Memory Key.
- (Fix) Hibernation swap area destroys POST work area.
- (Fix) Fix the incorrect setting of PCI IRQ routing in docking
station CardBus controller.
- (Fix) Pressing Initialize(F9) key twice will reset network boot
sequence to other than BIOS Setup Default.
Installation Instructions
-------------------------
NOTES: - You need an AC adapter and a charged battery pack to update
the system program.
- If your computer is attached to any kind of docking station
or port replicator turn off the computer and detach it
before proceeding.
- Make sure the BIOS Update diskette is write protected.
- Check the embedded controller version number by invoking the
IBM BIOS Setup Utility or by running ThinkPad Configuration
from the operating system and selecting the System
Information button.
1. Print these instructions or display on another computer.
2. Firmly connect the AC adapter to the computer.
3. Insert the System Program Service Diskette into the diskette drive
and turn on the computer.
4. Select Read this first from the menu and carefully read the
information that appears.
5. Press the Esc key to return to the menu.
6. Select Update system program and follow the instruction on
the screen.
WARNING: Do not turn off or suspend the computer until the update
has been completed. If you turn off or suspend the
computer while the update is still in progress the
system board may have to be replaced.
After the update has been completed do the following to make the
changes effecive.
7. Make sure there is no diskette in the diskette drive then turn on
the computer.
8. While the "Press F1 for IBM BIOS Setup Utility" message is
displayed at the lower-left area of the screen press the F1 key.
The IBM BIOS Setup Utility menu will be displayed. If a password
prompt appears type the correct password.
9. Verify the BIOS version and date.
10.Press the F9 key to load default configuration.
11.Select Yes.
12.Press the F10 key to save default configuration.
13.Select Yes. The system will restart automatically.
BIOS Information
----------------
Each version of the System Program Service Diskette contains the
following system program (BIOS). The BIOS Version and the date as well
as the Embedded controller version number can be viewed by running
ThinkPad Configurator from your operating system and selecting the
System Information button or by invoking IBM BIOS Setup Utility.
1. Make sure there is no diskette in the diskette drive then turn
off the computer.
2. Turn on the computer.
3. While the "Press F1 for IBM BIOS Setup Utility" message is
displayed at the lower-left area of the screen press the F1 key.
The IBM BIOS Setup Utility menu will be displayed. If a password
prompt appears type the correct password. The BIOS version and
date are displayed on the first screen of the IBM BIOS Setup
Utility.
Diskette BIOS BIOS Embedded controller
Version Version Date Version
-------- -------- ---------- -------------------
1.00 13ET14WW 2001-03-06 N/A
1.01 13ET16WW 2001-07-31 N/A
1.02 13ET17WW 2001-09-05 N/A
1.03 13ET18WW 2002-04-17 N/A
1.04 13ET19WW 2002-10-16 N/A
1.05 13ET20WW 2003-06-06 N/A
Memory information
------------------
The following information shows memory areas that are either
unavailable or that can be included with a memory manager such as
EMM386.
Reserved BIOS Area:
C0000-CFFFF (reserved for Video BIOS)
E0000-FFFFF (reserved for BIOS)
Trademarks
----------
* IBM and ThinkPad are trademarks of IBM Corporation in the United
States.
* Windows is a trademark of Microsoft Corporation.
Other company product and service names may be registered
trademarks trademarks or service marks of others.